🏊♂️ The Ultimate Texas Pool Care Schedule: What to Do Each Month 🌞
Keeping your pool sparkling, safe, and swim-ready year-round takes more than just chlorine and sunshine - it takes consistency. For homeowners in North Texas, where temperatures swing from blazing summers to mild winters, staying on top of pool care is key to protecting your investment and keeping your water crystal clear.
At Swim Solutions Pool Service, we’ve created the ultimate month-by-month pool maintenance guide tailored to our local climate in Allen, Anna, Lucas, McKinney, Melissa, Prosper, Fairview, Frisco and surrounding cities. 💦
🌸 Spring (March – May): Prep & Refresh
As North Texas warms up, it’s time to wake your pool from its winter nap.
✅ Skim & Vacuum Thoroughly – Remove leaves, pollen, and winter debris.
✅ Inspect Filters & Pumps – Clean cartridges or backwash filters to ensure clear water flow.
✅ Salt Cell Cleaning – For saltwater systems, inspect and clean your salt cell to prevent buildup and maintain chlorine efficiency.
✅ Check GFCI Outlets – Test Ground Fault Circuit Interrupters (GFCIs) on pumps, heaters, and lights for safety.
✅ Water Chemistry Tune-Up – Balance pH (7.4–7.6), alkalinity (80–120 ppm), and stabilizer levels before heavy swim use begins.
✅ Schedule a Professional Equipment Inspection – Spring is ideal for a maintenance visit to catch any wear before summer rushes in!
💡 Pro Tip: Add an energy-efficient variable-speed pump or automation system to keep things running smoothly all season long.
☀️ Summer (June – August): Maintain & Monitor
Texas summers are HOT - and so is your pool usage! Consistent care keeps your pool safe, refreshing, and crystal clear.
✅ Weekly Water Testing – High temps and frequent use can throw off chlorine and pH balance fast.
✅ Filter Cleanings Every 4–6 Weeks – Heavy use means more debris and sunscreen clogging up filters.
✅ Brush Walls & Tile Lines – Prevent algae and calcium buildup.
✅ Monitor Water Levels – Evaporation is strong in 100°+ heat, so top off as needed.
✅ Inspect Salt Cell & Reclean Mid-Summer – Keep your chlorine production strong!
✅ Check for Leaks & Unusual Sounds – Pumps, heaters, and motors work overtime in summer - catch issues early.
💦 Pro Tip: Use a solar cover or automatic pool cover to reduce evaporation and chemical use.
🍂 Fall (September – November): Clean & Conserve
As leaves start to drop 🍁 and temps cool down, your pool still needs attention to stay swim-ready and efficient.
✅ Skim Leaves Frequently – Fallen debris can clog skimmers and filters.
✅ Deep Clean Filter – End-of-season cleaning removes oils and fine particles.
✅ Lower Chlorine Levels Slightly – Cooler weather slows bacteria growth.
✅ Check and Reset Timers – Shorter days mean less pump runtime is needed.
✅ Inspect GFCI & Electrical Systems Again – Especially before plugging in heaters or new equipment.
✅ Winter Chemical Prep – Start adjusting chemistry if you plan to reduce use or cover the pool.
💡 Pro Tip: Fall is the best time to schedule equipment upgrades or repairs before the busy spring season returns.
❄️ Winter (December – February): Protect & Preserve
Even in North Texas, freezing nights can happen! 🥶 Proper winter care prevents damage and keeps your pool ready for spring.
✅ Run Your Pump During Freezes – Keeps water moving to prevent pipe damage.
✅ Inspect and Clean Filter Once Mid-Winter – Debris and dust can still collect.
✅ Balance pH and Alkalinity – Stable chemistry helps protect plaster and equipment during low use.
✅ Cover the Pool – A high-quality cover keeps out debris and protects water quality.
✅ Check GFCI Functionality Monthly – Moisture + cold weather = potential electrical risks.
✅ Salt Cell Maintenance – If water temps drop below 60°F, your salt system may stop producing chlorine; supplement with manual chlorination.
💡 Pro Tip: Schedule a winter service visit to ensure your pump, heater, and electrical systems are freeze-ready.
🔧 Why Routine Pool Care Matters
A consistent pool care schedule keeps your investment protected and your water safe for family and friends. Regular maintenance prevents algae, equipment failures, and costly repairs - and ensures you enjoy a beautiful, sparkling pool every day of the year. 🌊
At Swim Solutions Pool Service, our licensed and certified team proudly serves Allen, Anna, Lucas, McKinney, Melissa, Prosper, Fairview, Frisco and surrounding cities. Whether you need regular weekly cleaning, salt cell service, or professional GFCI inspections, we’ve got you covered. 💙
💬 Ready for Hassle-Free Pool Care?
Let the experts handle it!
📞 Call or text Swim Solutions Pool Service today to schedule your seasonal maintenance visit or set up a weekly service plan that fits your pool’s needs.
➡️ Serving North Texas homeowners who want peace of mind, crystal-clear water, and reliable service - all year long.
